Knowledgebase:
Algo 8301 Paging device and Contact info
Posted by Craig Averbeck on 15 August 2016 03:58 PM

The Base & Firmware only take a couple of minutes each, but the "Sys" stage is very large and will take about 10 minutes.

To perform the upgrade, use the From URL option in the firmware upgrade section (in the System->Maintenance tab), and then copy and paste the full firmware links below into the Upgrade URL field in the web interface. This is done one at a time, starting from the first one in the list, and uses exactly the same process for each.

Base:

 http://207.194.164.26/labpub/shared-pb/algo-pb-base-r1.3.fw

 

Sys:

 http://207.194.164.26/labpub/shared-pb/algo-pb-sys-r1.3.fw

 

Firmware (8301):

 http://207.194.164.26/labpub/8301/algo-8301-1.3.fw

 

Regards,

Larry Phillips | Client Services Engineer
Algo Communication Products Ltd.
4500 Beedie Street, Burnaby, BC V5J 5L2
Tel: 604-454-3795 (direct)

Email: [email protected]

          [email protected]

Tel: 604-454-3792 (support)

Web: www.algosolutions.com

(0 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below (we use this to prevent automated submissions).